Quad Helix in 1.0mm S.S wire (can be fabricated in 0.9mm S.S wire: -
Bands 6 / 6 with wire soldered to them as shown.
Components shown: -
Labial Bow 3 / 3 in 0.8mm S.S wire.
'T' Clasp 5 / - in 0.5mm S.S wire.
'Z' Springs / Single Cantilever Springs (drawn in two different ways) 2 / 2 in 0.5mm S.S wire.
N.B. A Double Cantilever Spring / Double 'Z' Spring (on the 1 / 1 for example) would obviously cover both teeth.
Components shown: -
South End Clasp 1 / 1 in 0.8mm S.S wire.
'C' Clasp 3 / - in 0.8mm S.S wire.
Palatal Finger Spring - / 3 in 0.5mm S.S wire.
Arrow Clasps 6 /6 in 0.8mm S.S wire
Trans-Palatal Arch: -
Bands on 6 / 6.
Palatal wire in 1.0mm S.S wire (can be fabricated in 0.9mm S.S wire).
Soldered to bands.
N.B. The 'U' loop may also be fabricated in the 'n' direction.
Lingual Arch: -
Adams clasps 6 / 6 in 0.7mm S.S wire.
Reverse Labial Bow 3 / 3 in 0.8mm S.S wire.
Standard Hawley Retainer: -
Adams clasps 6 / 6 in 0.7mm S.S wire.
Labial Bow 3 / 3 in 0.8mm S.S wire.
Adams clasps 6 / 6 in 0.7mm S.S wire.
Labial Bow 3 / 3 in 0.8mm S.S wire. (soldered to Adams clasps 6 / 6).
Mid-line screw.
Flat Anterior Bite Plane / Inclined Anterior Bite Plane 3 / 3. (Other specifications can be given - such as the antro - posterior depth of the bite plane and the height).
Delta clasps 6 / 6 in 0.8mm S.S wire.
Occlusal rests 7 / 7 in 0.8mm S.S wire. (Ball Ended clasps can be used here).
Ball Ended Clasps 21 / 12 in 0.8mm S.S wire.
Components shown: -
Double Adams clasps 54 / 45 in 0.7mm S.S wire.
'C' clasps 21 / 12 in 0.8mm S.S wire.
Ball Ended clasps in 0.8mm S.S wire.
Teeth shaded to indicate twin block coverage.
Components shown: -
Adams clasps 6 / 6 in 0.7mm S.S wire.
Mid-line screw
.
Labial Bow 3 / 3 in 0.8mm S.S wire.
Teeth shaded to indicate twin block coverage.
